mkt@mackwellpumps.com
+91 9904087111
THERMACK Series
ISO 9001:2015 Certified
THERMACK series is specially developed for thermal oil transfer and extremely hot oil or fluid transfer.
The hydraulic characteristics of pumps are in accordance with the standard DIN and all international for pumps. This means that for each installation the most suitable pump can be used to give optimum performance. THERMACK series casing and impeller are made with nodular cast iron JS 1025 which is very resistant to high temperature . stuffing and bearing housing are made of cast iron (GG 26) shaft are made of very tensile strength material 431 stainless steel.
Highly recommended for thermal fluid- hot oil transfer – and all type of heat transfer liquids.
| Capacity: | 10-750m3/hr |
|---|---|
| Head: | 10-110mtr. |
| Discharge Size: | up to DN 100mm |
| Temperature: | 100° c to 350° c |
| Speed: | 1440-2900-3600 rpm |
| Pressure: | up to 11 bar. |
| M.O.C: | wcb , ss 304, ss316 as pre requirement |
- Thermal fluid transfer for boiler .
- Leather industries , rubber industries
- Textiles plants.
- Food processing plants &machines .
- Wood ,ply board industries & laminate industries.
- Chemical & petrochemical processing industries.
- Paper/sugar mils.
- Mfg. of plastic & synthetic fibre material.
- The impeller is overhung mounted on the end of the end shaft design.
- Unique shaft design to be able to withstand all mechanical and thermal efforts generated during operation of the pump with minimum deflection.
- Cast iron bearing housing give shaft support and it also houses the mechanical seal. And it also equipped with external cooling wings.
